KMI PE KM-7417BDNP

About
KM-7417BDNP is a linear low density polyethylene for injection molding Applications: Food Containers, lids, housewares&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good Tensile Strength
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	50	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)	5.00	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Tensile impact strength	189	kJ/m²	ASTM D1822

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	45.0	℃	ASTM D648
Embrittlement temperature	-76.1	℃	ASTM D746
Vicat Softening Temp	90.0	℃	ASTM D1525
Melting temperature	124	℃	Internal Method
Crystallization peak temperature
DSC	109	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	52		ASTM D2240
tensile strength
fracture	7.58	MPa	ASTM D638
Tensile strain
fracture	120	%	ASTM D638
Bending modulus	421	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.