KOPA® KN135HB30HIBL

About
KOPA® KN135HB30HIBL is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated RoHS Compliant Good Dimensional Stability Heat Resistant&&

Product Description
SupplierKolon
GenericPA6
Material StatusCommercial: Active
FeaturesGood Dimensional Stability,High Heat Resistance,HB
AvailabilitysNorth America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.35g/cm³ASTM D792
Shrinkage rate
MD0.10 to 0.30%ASTM D955
Water absorption rate
Equilibrium, 23 ℃, 60% RH0.40%ASTM D570

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch
23℃88J/mASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature ASTM D648A
0.45 MPa, unannealed190ASTM D648-A
1.8 MPa, unannealed175ASTM D648-A
Melting peak temperature220ASTM D3418
Linear coefficient of thermal expansion
MD4.0E-51/℃ASTM D696

Electrical performanceNominal valueUnitTest method
Dielectric strength22kV/mmASTM D149
Dielectric constant
1 MHz3.50 ASTM D150
Arc resistance136secASTM D495

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant levelHB UL 94

MECHANICALNominal valueUnitTest method
Rockwell hardness
R-level115 ASTM D785
tensile strength
23℃98.0MPaASTM D638
Tensile strain
Fracture, 23 ℃6.5%ASTM D638
Bending modulus
23℃5880MPaASTM D790
bending strength
23℃166MPaASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.