| About |
|---|
| Product Description | |
|---|---|
| Supplier | Kolon |
| Generic | TPC-ET |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，5.0kg | 4 | g/10min | ISO 1133 |
| Water absorption rate | |||
| 23 ℃, 24 hours, in water | 0.4 | % | ISO 62 |
| Shrinkage rate | 1.5~1.9 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 42 | ISO 868 | |
| tensile strength | |||
| 50 mm/min | 21 | MPa | ISO 527 |
| Tensile strain | |||
| fracture | 450 | % | ISO 527 |
| Bending modulus | |||
| 10 mm/min | 104 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | N.B | kJ/m² | ISO 179-1eA |
| -40℃ | N.B | kJ/m² | ISO 179-1eA |
| Charpy Notched Impact Strength | |||
| 23℃ | N.B | kJ/m² | ISO 180 |
| -40℃ | N.B | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 200 | ℃ | ISO 11357-1 |
| Vicat Softening Temp | |||
| A50 | 154 | ℃ | ISO 306 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Processing temperature | Nominal value | Unit | Test method |
| drying temperature | 80-110 | ℃ | |
| Drying time | 3-6 | hrs | |
| Control moisture content | ≤ 0.08 | % | |
| Front cylinder temperature | 220 ~ 240 | ℃ | |
| Mid cylinder temperature | 210 ~ 230 | ℃ | |
| Temperature at the rear of the cylinder | 190 ~ 210 | ℃ | |
| Nozzle temperature | 220 ~ 240 | ℃ | |
| Mold temperature | 20-40 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |