| About |
|---|
| JSS牌号是“HCPP”，它是一种高结晶度共聚聚丙烯，并具有出色的刚性，耐热和耐划伤性能。 这些也表现出高光泽度和刚度与冲击强度之间的良好平衡。 这些等级被设计成在注塑设备中加工并用于各种应用，包括汽车部件，薄壁容器和家用电器。 |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good surface appearance,Heat Resistance, Good,High scratch resistance,High crystallization |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index | 10 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 1765 | Mpa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa | 135 | ℃ | ASTM D648 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D790 | ||
| 23℃ | 88 | J/m | ASTM D256 |
| -10℃ | 34 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |