KOPLA PA6 KNE1020

About
KOPLA PA6 KNE1020 is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific. Important attributes of KOPLA PA6 KNE1020 are: Flame Rated Good Toughness Impact Modified Impact Resistant Typical applications include: Automotive Electrical/Electronic Applications&&

Product Description
Supplier	KOPLA
Generic	PA6
Material Status	Commercial: Active
Features	High impact resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.06	g/cm³	ASTM D792
Shrinkage rate
MD	1.80-2.40	%	ASTM D995
Water absorption rate
23℃，24hr	1.20	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	105	R 级	ASTM D785

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	120	℃	ASTM D648
1.8 MPa, unannealed	50	℃	ASTM D648
Melting temperature	220	℃	DSC
Vicat Softening Temp
Linear coefficient of thermal expansion
MD	0.8E-4	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Volumetric resistance	3.0E+13	Ω.cm	ASTM D257
Insulation strength
	19	KV/mm	ASTM D149
Dielectric constant
	3.00	60 Hz	ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
–	HB		UL-94

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.