| About |
|---|
| Korton E-CTFE is an Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) product. It is available in North America. Applications of Korton E-CTFE include aerospace, electrical/electronic applications, film and wire & cable. Characteristics include: Flame Rated Wear Resistant Chemical Resistant Flame Retardant Good Stiffness&& |
| Product Description | |
|---|---|
| Supplier | Saint Gobain |
| Generic | ECTFE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Gamma radiation,Flame Characteristics,Good wear resistance,Solvent resistance,Heat Stabilized,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.68 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.010 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| With oneself – static | 0.075 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 25 | µm | |
| Secant modulus | ASTM D882 | ||
| 1% secant, MD | 1520 | MPa | ASTM D882 |
| 1% secant, TD | 1380 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield | 34.5 | MPa | ASTM D882 |
| TD, yield | 31.0 | MPa | ASTM D882 |
| MD, fracture | 55.2 | MPa | ASTM D882 |
| TD, fracture | 48.3 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 200 | % | ASTM D882 |
| TD, fracture | 250 | % | ASTM D882 |
| Elmandorf tear strength | |||
| MD | 1200 | g | ASTM D1922 |
| Water vapor permeability | 7.8 | g/m²/24 hr | ASTM E96 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 149 to 171 | ℃ | ASTM D794 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric strength | 220 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 60 Hz | 2.59 | ASTM D150 | |
| 1 MHz | 2.56 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 60 Hz | 5.0E-3 | ASTM D150 | |
| 1 MHz | 7.7E-3 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| Extreme oxygen index | 60 | % | ASTM D2863 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 80 | ASTM D2457 | |
| Haze | 2.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |