| About |
|---|
| Korton FEP is a Polyvinylidene Fluoride (PVDF) product. It can be processed by laminating or thermoforming and is available in North America. Applications of Korton FEP include electrical/electronic applications, aerospace, bags/liners, coating applications and containers. Characteristics include: Flame Rated Chemical Resistant Good Flexibility UV Resistant Weather Resistant&& |
| Product Description | |
|---|---|
| Supplier | Saint Gobain |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good flexibility,Low coefficient of friction,Low odor,Solvent resistance,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.13 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| Metal – Static | 0.075 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| 1% secant, MD | 483 | MPa | ASTM D882 |
| tensile strength | |||
| MD, yield | 24.1 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | 300 | % | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 204 | ℃ | ASTM D794 |
| Melting temperature | 274 to 295 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 9.9E-5 | 1/℃ | ASTM D696 |
| specific heat | 1170 | J/kg/℃ | ASTM C351 |
| Thermal conductivity coefficient | 0.20 | W/m/K | ASTM C177 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 0.80 | ohms·cm | ASTM D257 |
| Dielectric strength | 240 | kV/mm | ASTM D149 |
| Dielectric constant | 2.10 | ASTM D150 | |
| Dissipation factor | 3.0E-4 | ASTM D150 | |
| Arc resistance | 300 | sec | ASTM D495 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| Extreme oxygen index | 95 | % | ASTM D2863 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |