| About |
|---|
| Korton PVDF is a Polyvinylidene Fluoride (PVDF) product. It is available in North America. Applications of Korton PVDF include automotive, electrical/electronic applications, aerospace, bags/liners and coating applications. Characteristics include: Flame Rated Chemical Resistant Corrosion Resistant Fatigue Resistant Heat Resistant&& |
| Product Description | |
|---|---|
| Supplier | Saint Gobain |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Gamma radiation,Corrosion Resistant,Self-extinguishing,Fatigue resistance,Good wear resistance,Solvent resistance,Heat Stabilized,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.77 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.040 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1980 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 41.7 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 300 | % | ASTM D638 |
| Bending modulus | 1380 | MPa | ASTM D790 |
| bending strength | |||
| yield | 66.9 | MPa | ASTM D790 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Elmandorf tear strength | |||
| MD | 50 | g | ASTM D1922 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 135 to 150 | ℃ | ASTM D794 |
| Melting temperature | 169 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 1.4E-4 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 9.8E+7 | ohms·cm | ASTM D257 |
| Dielectric strength | 140 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 60 Hz | 10.0 | ASTM D150 | |
| Dissipation factor | |||
| 1 kHz | 0.016 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| Extreme oxygen index | 44 | % | ASTM D2863 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | 93.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |