Kostrate® EDGE MT

About
Kostrate® EDGE MT is a Thermoplastic product. It can be processed by extrusion or extrusion blow molding and is available in North America.&&

Product Description
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	Terpolymer
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.01	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	11	g/10min	ASTM D1238
Shrinkage rate
MD	0.30 to 0.50	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Dart impact equipped with measuring instruments
3.18 mm	5.08	J	ASTM D3763

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 3.2 mm	79.4	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
Transmittance	90.0	%	ASTM D1003
Haze	1.5	%	ASTM D1003

Supplementary information	Nominal value	Unit	Test method
Dishwasher Test	3.0E+2	Cycles

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	70		ASTM D2240
tensile strength
fracture	31.0	MPa	ASTM D638
Tensile strain
fracture	250	%	ASTM D638
Bending modulus	1380	MPa	ASTM D790
bending strength
yield	34.5	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.