| About |
|---|
| Koylene SRM100NC is Polypropylene Random copolymer suitable for Injection Moulding and Stretch Blow Moulding process. It is an ideal material for making high clarity containers, housewares, syringes and ISBM products. The grade contains clarifier and antistatic agent that reduces static charge build up on products. FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on “Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water”. Additives incorporated in this grade conform to the positive list of constituents as prescribed in IS 10909. The grade and the additives also comply with FDA:CFR:Title 21,177.1520, olefin polymers.&& |
| Product Description | |
|---|---|
| Supplier | Reliance |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Food contact compliance,Random copolymer,Antistatic property |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 12 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 3.20 mm, injection molding | 30.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Yield, 3.20 mm, injection molding | 12 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 1100 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 65 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, annealed | 95.0 | ℃ | ASTM D648 |
| Melting temperature | 150 | ℃ | DSC |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 190 to 240 | °C | |
| Barrel middle temperature | 190 to 240 | °C | |
| Barrel front temperature | 190 to 240 | °C | |
| Nozzle temperature | 240 to 250 | °C | |
| Mold temperature | 40 to 60 | °C | |
| Injection pressure | 58.8 to 98.1 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type I |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |