KPOL-LLDPE LL K-1.1/918

About
Linear Low Density Polyethylene Applications Typical applications are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), Industrial consumer packaging and high clarity film if blended with (10-20%) LDPE. Characteristics LLDPE Butene Copolymer. KPOL® LL K- 1.1/918 is a butene linear low density polyethylene resin designed for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, puncture resistance, high tensile strength and good hottack properties.&&

About

Linear Low Density Polyethylene Applications Typical applications are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), Industrial consumer packaging and high clarity film if blended with (10-20%) LDPE. Characteristics LLDPE Butene Copolymer. KPOL® LL K- 1.1/918 is a butene linear low density polyethylene resin designed for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, puncture resistance, high tensile strength and good hottack properties.&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good flexibility,Food contact compliance,Inoxidizability,Good Tensile Strength,Low density,Copolymer,Butylene copolymer,Puncture Resistant
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	1.1	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
tensile strength			ASTM D882
MD, fracture	40.0	MPa	ASTM D882
TD, fracture	30.0	MPa	ASTM D882
Bending modulus			ASTM D882
1% secant, MD	170	MPa	ASTM D882
1% secant, TD	200	MPa	ASTM D882
Drop hammer impact	120	g	ASTM D1709-A

optical performance	Nominal value	Unit	Test method
gloss
60°	96		ASTM D2457
Haze	10	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.