KPOL-NYLON K-NY6/40CF2

About
Standard Polyamide 6 / 6.6 Copolymer Characteristics KPOL® NY6/40CF2 is a Copolymer of Nylon 6 high viscosity, which has excellent characteristics for extruded films, co-extruded multilayer packaging. The chemical combination of monomers, confers a greater ability to orient the film, with optimization and high degree of luster, excellent transparency, gas barrier and high tear resistance. Applications The grade is suitable for a wide field of film and extrusion applications. This material has following features: Outstanding processability, Good mechanical properties, Good transparency and Good puncture resistance. Approved for direct and indirect contact with food (FDA / EC ).&&

About

Standard Polyamide 6 / 6.6 Copolymer Characteristics KPOL® NY6/40CF2 is a Copolymer of Nylon 6 high viscosity, which has excellent characteristics for extruded films, co-extruded multilayer packaging. The chemical combination of monomers, confers a greater ability to orient the film, with optimization and high degree of luster, excellent transparency, gas barrier and high tear resistance. Applications The grade is suitable for a wide field of film and extrusion applications. This material has following features: Outstanding processability, Good mechanical properties, Good transparency and Good puncture resistance. Approved for direct and indirect contact with food (FDA / EC ).&&

Product Description
Generic	PA66/6
Material Status	Commercial: Active
Features	Excellent Processability,High Viscosity,Low odor,Food contact compliance,Good tear strength,Copolymer,Puncture Resistant
Availabilitys	North America,Latin America
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³	ASTM D792
Relative viscosity – SAV @ 96% Sulfuric Acid
—	4.10		ASTM D789
—	4.10		ISO 307

film	Nominal value	Unit	Test method
Oxygen transfer rate
23℃，0% RH	26	cm³/m²/24 hr	ASTM D3985
Water vapor transmittance
40℃，90% RH	180	g/m²/24 hr	ISO 15106-3

THERMAL	Nominal value	Unit	Test method
Melting temperature	190	℃	ASTM D2117

optical performance	Nominal value	Unit	Test method
gloss	58		ASTM D523
Haze	20	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.