| About |
|---|
| Kraton D1101 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Japan in the physical form(s) outlined in the following grade nomenclature. D1101 JO – supplied as dusted crumb D1101 JU – supplied as undusted crumb D1101 JSM – supplied as powder dusted with amorphous silica Kraton D1101 J is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.&& |
| Product Description | |
|---|---|
| Generic | SBC |
| Material Status | Commercial: Active |
| Features | Block Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 200℃，5.0kg | < 1.0 | g/10min | ASTM D1238 |
| Combined with styrene | 28.0 to 34.0 | % | |
| Ash Content | ISO 247 | ||
| JO | < 1.0 | % | ISO 247 |
| JSM | < 5.0 | % | ISO 247 |
| JU | < 0.50 | % | ISO 247 |
| Volatiles | |||
| 2 hr，110℃ | < 1.0 | % | |
| Solution viscosity | |||
| 25wt% toluene, 25 ℃ | 3.0 to 5.0 | Pa·s | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 30 seconds | 72 | ISO 7619 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 33.0 | MPa | ISO 37 |
| 300% strain | 2.90 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 880 | % | ISO 37 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 25%w toluene solution at 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |