KRATON® D1119 P

About
Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT – supplied as a dusted dense pellet Kraton D1119 PSM – supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.&&

About

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT – supplied as a dusted dense pellet Kraton D1119 PSM – supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.&&

Product Description
Generic	SIS
Material Status	Commercial: Active
Features	Inoxidizability,Copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930	g/cm³	ASTM D4025
Melt Flow Rate
200℃，5.0kg	25	g/10min
Antioxidant Additive	0.080 to 0.30	%	Internal Method
Polystyrene content	21 to 24	%	Internal Method
Total Extractables	< 1.0	%	Internal Method
Ash Content
PSM	2.5 to 5.0	%	ISO 247
T. Talc	0.30 to 0.40	%	Internal Method
Volatiles	< 0.50	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw A, 10 seconds, molded	30		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	2.41	MPa	ASTM D412
300% strain	1.10	MPa	ASTM D412
Tensile strain
fracture	1000	%	ASTM D412

Supplementary information	Nominal value	Unit	Test method
Diblock Content	66.0
Styrene/Rubber ratio	22/78

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.