KRATON® D1161 E

About
Kraton D1161 E is a clear, linear triblock copolymer based on styrene and isoprene with a ploystyrene content of 15%. It is supplied from Europe in the physical form identified below. D1161 ES – supplied as porous pellets dusted with silica D1161 EU – supplied as undusted porous pellets D1161 ESM – supplied as powder dusted with amorphous silica Kraton D1161 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.&&

About

Kraton D1161 E is a clear, linear triblock copolymer based on styrene and isoprene with a ploystyrene content of 15%. It is supplied from Europe in the physical form identified below. D1161 ES – supplied as porous pellets dusted with silica D1161 EU – supplied as undusted porous pellets D1161 ESM – supplied as powder dusted with amorphous silica Kraton D1161 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.&&

Product Description
Generic	SIS
Material Status	Commercial: Active
Features	Block Copolymer,Inoxidizability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ISO 2781
Apparent density	0.35	g/cm³	ASTM D1895B
Melt Flow Rate
200℃，5.0kg	9.0	g/10min	ISO 1133
Solution viscosity	1200	mPa·s	Internal Method
Antioxidant Additive	> 0.060	%	Internal Method
Extractables	< 1.0	%	Internal Method
Polystyrene content	14 to 17	%	Internal Method
molecular weight	207000 to 237000	g/mol	Internal Method
Ash Content			ISO 247
ES	0.10 to 0.40	%	ISO 247
ESM	2.5 to 5.0	%	ISO 247
ET	0.10 to 0.40	%	ISO 247
EU	< 0.20	%	ISO 247
Volatiles	< 0.30	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 30 seconds, molded	30		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength
yield	28.0	MPa	ISO 37
300% strain	0.900	MPa	ISO 37
Tensile strain
fracture	1300	%	ISO 37

Supplementary information	Nominal value	Unit	Test method
Coupling Efficiency	78 to 84	%	Internal Method

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.