| About |
|---|
| Kraton D1189 E is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied from Europe in the physical forms indicated in the grade nomenclature below. Kraton D1189 ES – supplied as porous pellets dusted with an amorphous silica Kraton D1189 ESM – supplied as powder dusted with an amorphous silica Kraton D1189 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.&& |
| Product Description | |
|---|---|
| Generic | SBC |
| Material Status | Commercial: Active |
| Features | Block Copolymer,Inoxidizability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.938 | g/cm³ | ISO 2781 |
| Apparent density | 0.40 | g/cm³ | ASTM D1895B |
| Antioxidant Additive | 0.14 | % | Internal Method |
| Extractables | < 1.0 | % | Internal Method |
| Polystyrene content | 31 to 33 | % | Internal Method |
| Ash Content | ISO 247 | ||
| — | 2.5 to 5.0 | % | ISO 247 |
| Product form “ES” | 0.150 to 0.400 | ISO 247 | |
| Volatiles | < 0.30 | % | Internal Method |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |