| About |
|---|
| Kraton G1633 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.5% mass. It is supplied from Europe in the physical forms identified below: Kraton G1633 EU – supplied as undusted fluffly crumb Kraton G1633 ES – supplied as fluffy crumb dusted with amorphous silica Kraton G1633 E is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures.&& |
| Product Description | |
|---|---|
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High Heat Resistance,Inoxidizability,Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ISO 2781 |
| Antioxidant Additive | > 0.030 | % | Internal Method |
| Polystyrene content | 28 to 31 | % | Internal Method |
| Total Extractables | < 1.6 | % | Internal Method |
| Ash Content | |||
| ES | 0.30 to 0.50 | % | ISO 247 |
| Volatiles | < 0.50 | % | Internal Method |
| Solution viscosity | 300 | mPa·s | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 7%w toluene solution at 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |