| About |
|---|
| Kraton G1651 E is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is supplied from Europe in two physical forms identified below. Kraton G1651 EU – supplied as undusted fluffy crumb Kraton G1651 ES – supplied as fluffy crumb dusted with amorphous silica Kraton G1651 E is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures.&& |
| Product Description | |
|---|---|
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Block Copolymer,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ISO 2781 |
| Solution viscosity | 1500 | mPa·s | Internal Method |
| Combined with styrene | 30.0 to 33.0 | % | Internal Method |
| Antioxidant Additive | > 0.030 | % | Internal Method |
| Extractables | < 1.6 | % | Internal Method |
| Ash Content | |||
| Product Form “ES” | 0.30 to 0.50 | % | ISO 247 |
| Volatiles | < 0.50 | % | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10%w toluene solution at 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |