| About |
|---|
| Kraton G1654E polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is supplied from Europe in the physical form shown below. Kraton G1654 ES – supplied as a “fluffy” crumb dusted with amorphous silica Kraton G1654 E is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1654 E in applications that must withstand weathering and high processing temperatures.&& |
| Product Description | |
|---|---|
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ISO 2781 |
| Antioxidant Additive | > 0.0300 | wt% | |
| Polystyrene content | |||
| KM 03 | 28.5 to 31.5 | wt% | |
| Total Extractables（KM 05） | < 1.6 | wt% | |
| Ash Content | |||
| ES | 0.4 to 0.6 | % | ISO 247 |
| viscosity | |||
| Solution，25℃ | 0.25 to 0.5 | Pa·s | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| volatility | |||
| KM 04 | < 0.5 | wt% |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10%w toluene solution at 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |