KRATON® G4610 H

About
Kraton G4610 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 31%w (45 parts/100 part rubber (phr). It is supplied from North America in the physical form identified below. G4610 HU – supplied as an undusted powder crumb. Kraton G4610 H is used as a base material for thermoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4610 H in applications that must withstand weathering and high processing temperatures.&&

About

Kraton G4610 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 31%w (45 parts/100 part rubber (phr). It is supplied from North America in the physical form identified below. G4610 HU – supplied as an undusted powder crumb. Kraton G4610 H is used as a base material for thermoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4610 H in applications that must withstand weathering and high processing temperatures.&&

Product Description
Generic	SEBS
Material Status	Commercial: Active
Features	Weather resistance is good,High Heat Resistance,Inoxidizability,Copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Antioxidant Additive	0.020 to 0.060	%	Internal Method
Polystyrene content	31 to 35	%	Internal Method
Total Extractables	25 to 37	%	Internal Method
Volatiles	< 1.0	%	Internal Method

elastic body	Nominal value	Unit	Test method
tensile strength
yield	> 5.52	MPa	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. Measured on the polymer before hydrogenation.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.