| About |
|---|
| Features: General easy flow, medium impact strength Applications: Electronics, Household appliances, Miscellaneous goods&& |
| Product Description | |
|---|---|
| Supplier | Kumho Petrochemical |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good liquidity,HB |
| Availabilitys | Europe,Asia Pacific,North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| 1.04 | g/cm³ | ASTM D792 | |
| 1.04 | g/cm³ | ISO 1183 | |
| ASTM D1238 | |||
| 35 | g/10min | ISO 1133 | |
| 48 | g/10min | ASTM D1238 | |
| 35 | g/10min | ASTM D1238 | |
| 0.50 to 0.80 | % | ISO 294-4 | |
| 0.50 to 0.80 | % | ASTM D955 | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| 26 | kJ/m² | ISO 179/1eA | |
| ASTM D256 | |||
| 25 | kJ/m² | ISO 180-1A | |
| 290 | J/m | ASTM D256 | |
| 240 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| 80.0 | ℃ | ISO 75-2/A | |
| 85.0 | ℃ | ASTM D648 | |
| 91.0 | ℃ | ISO 75-2/B | |
| 95.0 | ℃ | ASTM D1525 2 | |
| 95.0 | ℃ | ISO 306 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| 45.6 | MPa | ASTM D638 | |
| 44.0 | MPa | ISO 527-2 | |
| 22 | % | ISO 527-2 | |
| 20 | % | ASTM D638 | |
| 2160 | MPa | ASTM D790 | |
| 2300 | MPa | ISO 178 | |
| 67.0 | MPa | ISO 178 | |
| 63.7 | MPa | ASTM D790 | |
| 108 | ISO 2039-2 | ||
| 108 | ASTM D785 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Rate A (50°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |