| About |
|---|
| 一般电镀 |
| Product Description | |
|---|---|
| Supplier | KumhoSunny |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Good liquidity |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | |||
| yield | 44.1 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 30 | % | ASTM D638 |
| bending strength | |||
| yield | 55.8 | MPa | ASTM D790 |
| Bending modulus | 2160 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 105 | ASTM D785 | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 85 | ℃ | ASTM D648 |
| Vicat Softening Temp | 96.1 | ℃ | ASTM D1525 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt Flow Rate | |||
| 200℃，5.0kg | 3.6 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | |||
| MD | 0.40-0.70 | % | ASTM D955 |
| Density | 1.04 | g/cm³ | ASTM D792 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.00 mm | HB | UL 94 | |
| 1.50 mm | HB | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 294 | J/m | |
| 23℃，6.4mm | 251 | J/m |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |