Kumsollan® KSE5090

About
KUMSOLLAN® KSE50 series products are modified thermoplastic elastomers on the base of the hydrogenated styrene the preceding copolymer (SEBS). They have soft tough, high elasticity, good weatherability, and 100% recyclable.&&

Product Description
Supplier	KumhoSunny
Generic	SEBS
Material Status	Commercial: Active
Features	Weather resistance is good,Good flexibility,High elastic,Renewable resources,Soft
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D792
Shrinkage rate
MD	1.1 to 1.5	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	90		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	9.00	MPa	ASTM D412
Tensile strain
fracture	> 500	%	ASTM D412

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.