| About |
|---|
| KUMSOLLAN® KSE51 series products are modified thermoplastic elastomers based on TPV technology. They are particularly suitable for interior and exterior on auto, with advantage of high heat resistant, oil resistant, good processability and excellent appearance.&& |
| Product Description | |
|---|---|
| Supplier | KumhoSunny |
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good surface appearance,High Heat Resistance,Grease resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 1.1 to 1.5 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 55 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 3.60 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | > 350 | % | ASTM D412 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |