KYDEX® 2200LT

About
KYDEX ® 2200LT is a high performance thermoplastic sheet designed for use in mass transit interior applications where SMP800C or BSS7239 compliance is required. General Information KYDEX ® 2200LT is a cost effective alternative to FRP that offers the additional benefit of weight savings. It meets the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) requirements for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162. Additionally, KYDEX ® 2200LT meets the toxicity criteria defined by SMP800C and BSS7239. Suggested Applications Seatbacks Armrests Window Shrouds Bulkhead Components Wall and Ceiling Panels Features Meets flamespread and smoke development requirements listed in 49 CFR 238 Compliant to SMP800C and BSS7239 toxicity specifications Excellent formability and fabrication characteristics Allows for tight tolerance control Excellent resistance to graffiti, chemicals, and staining&&

About

KYDEX ® 2200LT is a high performance thermoplastic sheet designed for use in mass transit interior applications where SMP800C or BSS7239 compliance is required. General Information KYDEX ® 2200LT is a cost effective alternative to FRP that offers the additional benefit of weight savings. It meets the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) requirements for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162. Additionally, KYDEX ® 2200LT meets the toxicity criteria defined by SMP800C and BSS7239. Suggested Applications Seatbacks Armrests Window Shrouds Bulkhead Components Wall and Ceiling Panels Features Meets flamespread and smoke development requirements listed in 49 CFR 238 Compliant to SMP800C and BSS7239 toxicity specifications Excellent formability and fabrication characteristics Allows for tight tolerance control Excellent resistance to graffiti, chemicals, and staining&&

Product Description
Supplier	Sekisui
Generic	PMMA+PVC
Material Status	Commercial: Active
Features	The fouling resistance,Low smoke,Solvent resistance
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³	ASTM D792

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	140	J/m	ASTM D256
Drop hammer impact			ASTM D5420
—	40.9	J	ASTM D5420
-29℃	14.2	J	ASTM D5420

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
1.8 MPa, unannealed, 3.2 mm	89.0	℃	ASTM D648
1.8 MPa, annealed, 3.18 mm	89.0	℃	ASTM D648
Linear coefficient of thermal expansion
MD	5.4E-5	1/℃	ASTM E831

FLAME CHARACTERISTICS	Nominal value	Test method
Flame Spread Index（No Burning Drip）	< 35.0	ASTM E162
Toxic gas emissions
Boeing（BSS 7239）	Pass
Bombardier（SMP 800-C）	Pass
Smoke density		ASTM E662
1.5 min	< 100	ASTM E662
4.0 min	< 200	ASTM E662

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	108		ASTM D785
Tensile modulus
3.18 mm	3900	MPa	ASTM D638
tensile strength
Yield, 3.18 mm	52.7	MPa	ASTM D638
Bending modulus
3.18 mm	3110	MPa	ASTM D790
bending strength
3.18 mm	77.9	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.