| About |
|---|
| KYDEX® 6200 is a proprietary, high performance thermoplastic sheet designed for use in mass transit vehicles such as subways, vans, buses, and trains.&& |
| Product Description | |
|---|---|
| Supplier | Sekisui |
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Low smoke,Clean,Flame Characteristics,Good tear strength,Solvent resistance,V-0 |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.2mm | 190 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed, 3.18 mm | 77.8 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 7.9E-5 | 1/℃ | ASTM D696 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 98 | ASTM D785 | |
| tensile strength | |||
| Yield, 3.18 mm | 41.0 | MPa | ASTM D638 |
| Bending modulus | |||
| 3.18 mm | 2410 | MPa | ASTM D790 |
| bending strength | |||
| 3.18 mm | 63.0 | MPa | ASTM D790 |
| Taber abraser | |||
| 1000 cycles | 42.0 | mg | ASTM D1044 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.71 mm | V-0 | UL 94 | |
| Radiation plate flame spread index | < 35.0 | ASTM E162 | |
| 900.0 µm | S4, ST2, SR2 | DIN 5510-2 | |
| 6.80 mm | S4, ST2, SR2 | DIN 5510-2 | |
| Smoke generation | < 200 | ASTM E662 | |
| Smoke generation | < 100 | ASTM E662 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 1.5 mins |
| 3. 4 mins |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |