| About |
|---|
| KYDEX® FST03 is a high performance thermoplastic sheet specifically formulated to meet all Boeing and Airbus toxicity requirements for aircraft interior components. Its integral pearlescence adds a new dimension to aviation interior design. KYDEX® FST03 meets the flammability, smoke development, and heat release requirements set forth in Federal Aviation Regulations (FAR) 25.853 paragraphs (a) and (d) as well as the toxicity requirements for Airbus (ABD0031) and Boeing (BSS7239). Its excellent thermoforming characteristics make it an ideal material for three-dimensional components where pearlescent design effects are desirable.&& |
| Product Description | |
|---|---|
| Supplier | Sekisui |
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | Antimicrobial properties,Low toxicity |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.32 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 3.18 mm | 2390 | MPa | ASTM D638 |
| tensile strength | |||
| 3.18 mm | 74.5 | MPa | ASTM D638 |
| Bending modulus | |||
| 3.18 mm | 2450 | MPa | ASTM D790 |
| bending strength | |||
| 3.18 mm | 101 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed, 3.18 mm | 125 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Toxic gas emissions | Pass | ||
| NBS smoke density | < 200 | FAR 25.853(d | |
| OSU Heat Release（Peak） | < 65.0 | kW/m² | FAR 25.853(d |
| OSU Heat Release（Total） | < 65.0 | kW·min/m² | FAR 25.853(d |
| Vertical combustion test | |||
| 60 Second | Pass | FAR 25.853(a | |
| 12 Second | Pass | FAR 25.853(a |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Part V |
| 3. Part IV |
| 4. ABD0031, BSS 7239 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |