KYDEX® FST CTL

About
KYDEX® FST CTL is a translucent thermoplastic sheet specifically formulated to meet all Boeing and Airbus toxicity requirements for aircraft interior components. KYDEX® FST CTL meets the flammability, smoke development, and heat release requirements set forth in Federal Aviation Regulations (FAR) 25.853 paragraphs (a) and (d) as well as the toxicity requirements for Airbus (ABD0031) and Boeing (BSS7239). Its excellent thermoforming characteristics make it an ideal material for three-dimensional components where transparent design elements are desirable.&&

About

KYDEX® FST CTL is a translucent thermoplastic sheet specifically formulated to meet all Boeing and Airbus toxicity requirements for aircraft interior components. KYDEX® FST CTL meets the flammability, smoke development, and heat release requirements set forth in Federal Aviation Regulations (FAR) 25.853 paragraphs (a) and (d) as well as the toxicity requirements for Airbus (ABD0031) and Boeing (BSS7239). Its excellent thermoforming characteristics make it an ideal material for three-dimensional components where transparent design elements are desirable.&&

Product Description
Supplier	Sekisui
Generic	PMMA+PVC
Material Status	Commercial: Active
Features	Antimicrobial properties,Low toxicity
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.34	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
3.18 mm	2390	MPa	ASTM D638
tensile strength
3.18 mm	74.5	MPa	ASTM D638
Bending modulus
3.18 mm	2450	MPa	ASTM D790
bending strength
3.18 mm	101	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed, 3.18 mm	125	℃	ASTM D648
Linear coefficient of thermal expansion
MD	5.4E-5	1/℃	ASTM E831

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Toxic gas emissions	Pass
NBS smoke density	< 200		FAR 25.853(d
OSU Heat Release（Peak）	< 65.0	kW/m²	FAR 25.853(d
OSU Heat Release（Total）	< 65.0	kW·min/m²	FAR 25.853(d
Vertical combustion test
60 Second	Pass		FAR 25.853(a
12 Second	Pass		FAR 25.853(a

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.