| About |
|---|
| KYNAR® 301F is a crystalline high molecular weight polymer of vinylidene fluoride. It is a finely ground versatile engineering plastic designed for solvent-based coatings and toner applications. It forms mechanically strong and tough films that have a broad temperature range. These films are highly resistant to most environmental conditions including gamma radiation and are essentially transparent to ultraviolet radiation.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Crystal,Gamma radiation,High molecular weight |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Melting peak temperature | 155 to 165 | ℃ | ASTM D3418 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.76 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| balance | 0.40 to 0.60 | % | ASTM D570 |
| Apparent viscosity of melt | |||
| 232℃，100 sec^-1 | 2800 to 3400 | Pa·s | ASTM D3835 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |