About |
---|
Excellent Humidity Resistance, Halogen-free and Antimony-free Environmental Friendly Casting Resin (TCG1100 series) Strong Points Halogen-Free / Antimony-Free Type Environmental Friendly Casting Resin. UL 94 V-0 Approved Grade for 6.4mm Layer Thickness. Long Pot Life and Excellent Workability Excellent Impregnation Property for parts. Excellent Mechanical Properties and Electrical Properties. Excellent Dampproofing Property. Application High Voltage Transformer and Flyback Transformer&& |
Product Description | |
---|---|
Supplier | KYOCERA |
Generic | 热固性聚酯 |
Material Status | Commercial: Active |
Features | Good Electrical Properties,Halogen free,No antimony,Moisture resistance,Dip,V-0 |
Availabilitys | Asia Pacific |
Process Methods | casting |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.57 | g/cm³ | |
Solution viscosity | 2200 | mPa·s |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Bending modulus | |||
25℃ | 6600 | MPa | |
bending strength | |||
25℃ | 111 | MPa |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Glass transition temperature | 111 | ℃ | TMA |
Linear coefficient of thermal expansion | |||
MD | 5.0E-5 | 1/℃ | TMA |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Volume resistivity | |||
25 ℃ | 3.6E+15 | ohms·cm | |
Dielectric strength | |||
25 ℃ | > 30 | kV/mm |
FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
---|---|---|---|
6.40 mm | V-0 | UL 94 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |