LACTEL® 50:50 DL-PLG

About
DLG = poly(DL-lactide-co-glycolide) Materials available: B6017-1: Inherent Viscosity – 0.15 to 0.25 IV B6010-1: Inherent Viscosity – 0.26 to 0.54 IV B6010-2: Inherent Viscosity – 0.55 to 0.75 IV B6010-3: Inherent Viscosity – 0.76 to 0.94 IV B6010-4: Inherent Viscosity – 0.95 to 1.20 IV B6013-1: Inherent Viscosity – 0.15 to 0.25 IV B6013-2: Inherent Viscosity – 0.55 to 0.75 IV This product is soluble in dicholormethane, tetrahydrofuran, ethyl acetate, cholorform, hexafluoroisopropanol, and acetone.&&

About

DLG = poly(DL-lactide-co-glycolide) Materials available: B6017-1: Inherent Viscosity – 0.15 to 0.25 IV B6010-1: Inherent Viscosity – 0.26 to 0.54 IV B6010-2: Inherent Viscosity – 0.55 to 0.75 IV B6010-3: Inherent Viscosity – 0.76 to 0.94 IV B6010-4: Inherent Viscosity – 0.95 to 1.20 IV B6013-1: Inherent Viscosity – 0.15 to 0.25 IV B6013-2: Inherent Viscosity – 0.55 to 0.75 IV This product is soluble in dicholormethane, tetrahydrofuran, ethyl acetate, cholorform, hexafluoroisopropanol, and acetone.&&

Product Description
Supplier	DuPont
Generic	PLA
Material Status	Commercial: Active
Features	Renewable resources,Biodegradable,Amorphous
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.34	g/cm³
Viscosity number	55.0 to 75.0	cm³/g

MECHANICAL	Nominal value	Unit
Tensile modulus	1380 to 2760	MPa
tensile strength	41.4 to 55.2	MPa
Tensile strain
fracture	3.0 to 10	%

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	45.0 to 50.0	℃

Supplementary information	Nominal value	Unit	Test method
Approx. Resorption	1.0 to 2.0	month
Crystalline Melt Transition	Amorphous

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.