| About |
|---|
| Finely woven cotton fabric, phenolic resin impregnated Applications: Rollneck-bearings Slippers Inserts for coupling boxes&& |
| Product Description | |
|---|---|
| Generic | 酚醛树脂 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.35 | g/cm³ | ISO 1183 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 15 | kJ/m² | ISO 180 |
| Notched impact strength of cantilever beam | 30 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | |||
| MD | 3.0E-5 | 1/℃ | ISO 11359-2 |
| Thermal conductivity coefficient | 0.29 | W/m/K | ISO 8302 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+8 | ohms | IEC 60093 |
| Dielectric constant | 5.00 | IEC 60250 | |
| Dissipation factor | 0.30 | IEC 60250 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Ball hardness | 170 | MPa | ISO 2039-1 |
| Tensile modulus | 7000 | MPa | ISO 527-2 |
| tensile strength | ISO 527-2 | ||
| yield | 80.0 | MPa | ISO 527-2 |
| fracture | 100 to 130 | MPa | ISO 527-2 |
| compressive strength | 170 | MPa | ISO 604 |
| friction coefficient | ASTM D1894 | ||
| Steel – Static | 0.020 | ASTM D1894 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. without lubrication |
| 3. with lubrication |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |