| About |
|---|
| Laprene® 830000547是一种苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物(SEBS)材料,。 该产品在北美洲、拉丁美洲或欧洲有供货,加工方式为:注射成型。 Laprene® 830000547的主要特性为:符合 REACH 标准。&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | SEBS |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 34 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile permanent deformation | 4 | % | ASTM D412 |
| tensile strength | 8.00 | MPa | ASTM D412 |
| 100% strain | 0.700 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 780 | % | ASTM D412 |
| tear strength | 26.0 | kN/m | ASTM D624 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 170 | °C | |
| Barrel middle temperature | 180 | °C | |
| Barrel front temperature | 180 | °C | |
| Nozzle temperature | 190 | °C | |
| Mold temperature | 20 to 40 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |