| About |
|---|
| Laprene® 83E200A25 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe, Latin America, or North America for extrusion. Primary attribute of Laprene® 83E200A25: REACH Compliant. Typical applications include: Construction Applications Industrial Applications&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | SEBS |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 25 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile permanent deformation | 0 | % | ASTM D412 |
| tensile strength | 5.10 | MPa | ASTM D412 |
| 100% strain | 0.400 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 850 | % | ASTM D412 |
| tear strength | 17.0 | kN/m | ASTM D624 |
| Compression deformation | |||
| 70℃，22 hr | 48 | % | ASTM D395B |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 3.0 | hr | |
| Barrel 1 zone temperature | 160 | °C | |
| Barrel 2 zone temperature | 170 | °C | |
| Barrel 3 zone temperature | 180 | °C | |
| Nozzle temperature | 180 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 3. Type 1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |