| About |
|---|
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ISO 2781 |
| Yellow Index | 0 | ASTM E313 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 72 | Shore A | ISO 7619-1 |
| Abrasion Loss | 40 | mm³ | ISO 4649 |
| Tensile Modulus | |||
| 50% | 2.3 | N/mm² | ISO 22654 |
| 100% | 3.7 | N/mm² | ISO 22654 |
| 300% | 5.8 | N/mm² | ISO 22654 |
| Tensile Strength | 35.4 | N/mm² | ISO 22654 |
| Elongation at Break | 880 | % | ISO 22654 |
| Tear strength | 44 | N/mm | ISO 34-1 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 80-90 | ℃ | |
| Drying Time | 3 | hr | |
| Dew Point | ＜-30 | ℃ | |
| Rear Temperature Zone 1 | 170 | ℃ | |
| Middle Temperature Zone 2 | 175 | ℃ | |
| Front Temperature Zone 3 | 180 | ℃ | |
| Nozzle temperature | 175 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |