| About |
|---|
| LARIPUR® LPR 9060EF是一种热塑性聚氨酯弹性体（聚醚）（TPU-聚醚）材料,。 该产品在北美洲、拉丁美洲或欧洲有供货,加工方式为:挤出或注射成型。 LARIPUR® LPR 9060EF的主要特性有: 阻燃/额定火焰 Flame Retardant 良好的柔韧性 耐候性好 耐化学品&& |
| Product Description | |
|---|---|
| Generic | TPU-醚 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Halogen free,Flame Characteristics,Low temperature toughness,Good wear resistance,Solvent resistance |
| Availabilitys | North America,Latin America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| 100 | ℃ | ASTM D1525 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 2.00mm | V-2 | UL 94 | |
| 2.20mm | V-2 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 86 | ASTM D2240 | |
| tensile strength | 43.3 | MPa | ASTM D412 |
| 50% modulus | 5.0 | MPa | ASTM D412 |
| 100% modulus | 6.8 | MPa | ASTM D412 |
| 300% modulus | 15.5 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 580 | % | ASTM D412 |
| tear strength | 70 | kN/m | ASTM D624 |
| Wear coefficient | 40 | DIN 53516 | |
| Compression deformation | 24 | % | ASTM D395 |
| Compression deformation | 42 | % | ASTM D395 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |