| About |
|---|
| SERIES 2102 POLYCAPROLACTONE ESTER Products based on polycaprolactones. They behave roughly in the same way as TPU in the Special Ester Series but exhibit a higher resistance to hydrolysis failure.&& |
| Product Description | |
|---|---|
| Generic | TPU-Capro |
| Material Status | Commercial: Active |
| Features | Good flexibility,Hydrolysis stability,Good Compression Set,Inoxidizability,Elastic,Low temperature toughness,Good tear strength,Good wear resistance,Grease resistance,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | DIN 53479 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 53.2 | MPa | DIN 53504 |
| 50% strain | 4.50 | MPa | |
| 100% strain | 6.50 | MPa | |
| 300% strain | 16.0 | MPa | |
| Tensile strain | |||
| fracture | 520 | % | DIN 53504 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 30 | DIN 53505 | |
| Wear amount | 84.0 | mm³ | DIN 53516 |
| Tear resistance | 70.0 | MPa | DIN 53515 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |