| About |
|---|
| Laser+® (B90A) is a Polyethylene Terephthalate (PET) material. It is available in Latin America or North America for injection blow molding or stretch blow molding. Important attributes of Laser+® (B90A) are: Copolymer Eco-Friendly/Green Food Contact Acceptable High ESCR (Stress Crack Resistant) Typical applications include: Food Contact Applications Bottles&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Renewable resources,Food contact compliance,Copolymer,High ESCR |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| bulk density | 870 | kg/m³ | Internal Method |
| Acetaldehyde | < 2.0 | ppm | Internal Method |
| Crystallinity | > 40 | % | Internal Method |
| Intrinsic viscosity | 0.82 to 0.86 | dl/g | Internal Method |
| water content | |||
| as packaged | < 0.25 | % | Internal Method |
| Particle size | |||
| Shape，Flat Cylinder | 3x3x2 | mm | Internal Method |
| colour | Internal Method | ||
| CIE b* | -5.0 to -1.0 | Internal Method | |
| CIE L* | > 78 | Internal Method | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 241 | ℃ | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Chip Size（nominal） | 48.0 to 58.0 | count/g | Internal Method |
| Fines（as packaged，+24 Mesh Size） | < 0.1 | wt% | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 149 to 171 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Dew Point | < -37 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |