| About |
|---|
| LCP-MG350防火加纤50%，填充，低翘曲； 应用于高精密电子部件专用 |
| Product Description | |
|---|---|
| Supplier | YOUHUA |
| Generic | 液态聚合物 |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | 0.07-0.52 | % | ASTM D955 |
| Density | 1.75 | g/cm³ | ASTM D792 |
| hardness | 98 | R | ASTM-D785 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength | 100 | MPa | ASTM-D638 |
| Elongation | 1.5 | % | ASTM-D638 |
| bending strength | 140 | MPa | ASTM D790 |
| Bending modulus | 16000 | MPa | ASTM D790 |
| other | Nominal value | Unit | Test method |
|---|---|---|---|
| Fiberglass content | 50 | % | 灼烧法 |
| Water absorption rate | |||
| 23℃，24hr | 0.03 | % | ASTM D570 |
| Flame retardant level | V-0 | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 10 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 260 | ℃ | ASTM D648 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |