| About |
|---|
| Product Description | |
|---|---|
| Supplier | DIC Corporation |
| Generic | 液态聚合物 |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Flame Characteristics |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | |||
| TD | 0.05 | % | ASTM D955 |
| MD | 0.06 | % | ASTM D955 |
| Water absorption rate | 0.02 | % | ASTM D570 |
| Density | 1.67 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 12000 | MPa | ASTM D790 |
| tensile strength | 150 | MPa | ASTM D638 |
| elongation at break | 2.4 | % | ASTM D790 |
| bending strength | 190 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 100 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.82Mpa | 265 | ℃ | ASTM D648 |
| 0.45Mpa | 285 | ℃ | ASTM D648 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1E+16 | ohms·cm | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |