| About |
|---|
| Product Description | |
|---|---|
| Supplier | NUC |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.914 | g/cm³ | ISO 1183 |
| Melt Flow Rate | 32 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 45 | HDD | ISO 868 |
| Tensile strain | |||
| fracture | 440 | % | ASTM D638 |
| tensile strength | 7 | MPa | ASTM D-638 |
| fracture | 7.5 | MPa | ASTM D638 |
| Tensile modulus | 90 | MPa | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -35 | ℃ | ASTM D746 |
| Melting temperature | 108 | ℃ | ISO 11357-3 |
| Vicat Softening Temp | 73 | ℃ | ISO 306 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |