Lennite® GUR1050

About
Medical grade Lennite UHMWPE is produced from premium resins in accordance with ASTM specification F648 and International Standard ISO 5834-1 for surgical implants. Westlake Plastics’ proprietary manufacturing processes and stringent quality control permit a well consolidated and consistent fabricated form. Recommended sterilization techniques include EtO gas, cold sterilization, and limited gamma irradiation. Applications Include: Total hip and knee joint prosthesis Various other surgical implants Medical devices Advantages of Medical Grade Lennite UHMWPE: Lot controlled and traceable ASTM F-648 and ISO 5834-1/2 compliant Available stock material in Type I and II resins Stress relieved Custom certifications available&&

About

Medical grade Lennite UHMWPE is produced from premium resins in accordance with ASTM specification F648 and International Standard ISO 5834-1 for surgical implants. Westlake Plastics’ proprietary manufacturing processes and stringent quality control permit a well consolidated and consistent fabricated form. Recommended sterilization techniques include EtO gas, cold sterilization, and limited gamma irradiation. Applications Include: Total hip and knee joint prosthesis Various other surgical implants Medical devices Advantages of Medical Grade Lennite UHMWPE: Lot controlled and traceable ASTM F-648 and ISO 5834-1/2 compliant Available stock material in Type I and II resins Stress relieved Custom certifications available&&

Product Description
Supplier	Westlake Plastics
Generic	Ultra-high molecular weight polyethylene
Material Status	Commercial: Active
Features	Ultra high molecular weight,Radiation disinfection,Ethylene oxide disinfection
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.934	g/cm³
Ash Content	55.0	ppm

MECHANICAL	Nominal value	Unit
tensile strength
yield	22.7	MPa
fracture	51.9	MPa
Tensile strain
fracture	390	%

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	150	kJ/m²
Notched impact strength of cantilever beam	140	kJ/m²

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.