Leostomer® ER2044

About
Leostomer® ER2044 is a Styrene Butadiene Block Copolymer (SBC) product. It is available in Asia Pacific or North America. Characteristics include: Copolymer Eco-Friendly/Green High Strength Weather Resistant&&

Product Description
Generic	SBC
Material Status	Commercial: Active
Features	Weather resistance is good,Renewable resources,Good Tensile Strength,Copolymer
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.898	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 15 seconds	40		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength
yield	11.0	MPa	ISO 37
300% strain	1.40	MPa	ISO 37
Tensile strain
fracture	1000	%	ISO 37
tear strength	23	kN/m	ISO 34-1
Compression deformation
70℃，22 hr	35	%	ISO 815

Aging performance	Nominal value	Unit	Test method
The rate of change in tensile strength in air
120℃，168 hr	-3.0	%	ISO 188
Changes in tensile stress during fracture in air
120℃，168 hr	2.0	%	ISO 188

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-60.0	℃	ISO 974

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.