| About |
|---|
| LEXAN™ CXT19 Resin is a High Heat Polycarbonate Copolymer Resin with Vicat of 190°C and crystal clear transparency. This resin is optimized to have a broad processing window with limited yellowing. It is available in limited transparent colors.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 330℃，2.16kg | 17 | g/10min | |
| 350℃，2.16kg | 33 | g/10min | |
| Melt Volume Rate | |||
| 330℃，2.16 kg | 15.0 | cm³/10min | |
| 350℃，2.16 kg | 30.0 | cm³/10min | |
| Shrinkage rate | |||
| MD：3.2 mm | 0.70 to 1.0 | % | |
| TD：3.2 mm | 0.70 to 1.0 | % | |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.50 | % | |
| Equilibrium, 23 ℃, 50% RH | 0.30 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 2600 | MPa | ASTM D638 |
| — | 2500 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 80.0 | MPa | ASTM D638 |
| yield | 80.0 | MPa | ISO 527-2/50 |
| fracture | 65.0 | MPa | ASTM D638 |
| fracture | 65.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 7.5 | % | ASTM D638 |
| yield | 7.0 | % | ISO 527-2/50 |
| fracture | > 25 | % | ASTM D638 |
| fracture | > 25 | % | ISO 527-2/50 |
| Bending modulus | |||
| 50 mm span | 2600 | MPa | ASTM D790 |
| — | 2550 | MPa | ISO 178 |
| bending strength | |||
| — | 120 | MPa | ISO 178 |
| Yield, 50 mm span | 120 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | 7.0 | kJ/m² | |
| 23℃ | 9.0 | kJ/m² | |
| Charpy Unnotch Impact strength | |||
| 23℃ | 无断裂 | ISO 179/1eU | |
| Impact strength of cantilever beam notch | |||
| -30℃ | 70 | J/m | ASTM D256 |
| 23℃ | 80 | J/m | ASTM D256 |
| -30℃ | 6.0 | kJ/m² | ISO 180-1A |
| 23℃ | 8.0 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | |||
| 23℃ | 无断裂 | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, 3.2 mm | 185 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 4.0 mm, 64 mm span | 185 | ℃ | ISO 75-2/Bf |
| 1.8 MPa, unannealed, 3.2 mm | 170 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 4.0 mm, 64 mm span | 170 | ℃ | ISO 75-2/Af |
| Vicat Softening Temp | |||
| B120 | 190 | ℃ | ISO 306/B120 |
| Linear coefficient of thermal expansion | |||
| MD：-40~40℃ | 6.0E-5 | 1/℃ | |
| TD：-40℃ | 6.0E-5 | 1/℃ | |
| Thermal conductivity coefficient | 0.20 | W/m/K | ISO 8302 |
| Glass transition temperature | |||
| Half the width | 195 | ℃ | Internal Method |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.609 | ISO 489 | |
| Transmittance | |||
| 1000 µm | 89.0 | % | |
| 2000 µm | 88.0 | % | |
| 3000 µm | 87.0 | % | |
| Dispersion coefficient | 30.0 | ISO 489 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 135 | °C | |
| Drying time | 5.0 to 6.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Recommended injection volume | 40 to 60 | % | |
| Barrel rear temperature | 280 to 330 | °C | |
| Barrel middle temperature | 300 to 340 | °C | |
| Barrel front temperature | 310 to 350 | °C | |
| Nozzle temperature | 305 to 345 | °C | |
| Processing (melt) temperature | 310 to 315 | °C | |
| Mold temperature | 120 to 170 | °C | |
| Back pressure | 0.300 to 0.700 | MPa | |
| Screw speed | 40 to 70 | rpm | |
| Vent depth | 0.025 to 0.076 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. Type I, 2.0 in/min |
| 4. 0.051 in/min |
| 5. 0.079 in/min |
| 6. at Yield |
| 7. 80*10*3 sp=62mm |
| 8. 80*10*3 mm |
| 9. 80*10*4 mm |
| 10. Rate B (120°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |