| About |
|---|
| LUX9610 is a UV stabilized flame retardant transparent PC featuring non brominated and non chlorinated FR system with good flow and thin wall FR performance providing good color stability under heat exposure. Developed for lightguide and LED applications. It meets WEEE/RoHS requirements for various applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Halogen free,V-0,Flame Characteristics,Weather resistance is good,High Viscosity,Good color stability,Good liquidity |
| Availabilitys | Europe,North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Rockwell hardness | 118 | R | ASTM D-785 |
| Tensile Stress | |||
| Yield, 50 mm/min | 62 | MPa | ISO 527 |
| Break, 50 mm/min | 58 | MPa | ISO 527 |
| Tensile Strain | |||
| Yield, 50 mm/min | 6 | % | ISO 527 |
| Break, 50 mm/min | 77 | % | ISO 527 |
| Tensile Modulus | |||
| 1 mm/min | 2230 | MPa | ISO 527 |
| Flexural Stress | |||
| Yield, 2 mm/min | 94 | MPa | ISO 178 |
| Flexural Modulus | |||
| 2 mm/min | 2250 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Unnotched Impact strength of cantilever beam | |||
| 23℃ | NB | J/m | ASTM D4812 |
| 80*10*3 +23°C | NB | KJ/m² | ISO 180/1U |
| 80*10*3 -30°C | NB | KJ/m² | ISO 180/1U |
| Izod Notched Impact strength | |||
| 23℃ | 760 | J/m | ASTM D256 |
| 80*10*3 +23°C | 70 | KJ/m² | ISO 180/1A |
| 80*10*3 -30°C | 11 | KJ/m² | ISO 180/1A |
| Multiaxial Instrumented Impact Total Energy | 130 | J | ISO 6603 |
| Charpy notch Impact strength | |||
| 23℃，80*10*3 sp=62mm | 68 | kJ/m² | ISO 179/1eA |
| -30℃，80*10*3 sp=62mm | 12 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23℃，80*10*3 sp=62mm | NB | kJ/m² | ISO 179/1eU |
| -30℃，80*10*3 sp=62mm | NB | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion CTE | |||
| -40 ℃~40 ℃, flowing flow | 6.8 | ×10-5/℃ | ASTM E831 |
| -40 ℃~40 ℃, horizontal xflow | 6.7 | ×10-5/℃ | ASTM E831 |
| Specific Heat | 1.26 | J/g/℃ | ASTM C351 |
| 0.2 | W/m/℃ | ASTM C177 | |
| Ball Pressure Test | |||
| 123℃-127℃ | PASSES | IEC 60695-10-2 | |
| Vicat Softening Temperature | |||
| B/50 | 143 | ℃ | ISO 306 |
| B/120 | 145 | ℃ | ISO 306 |
| Hot deformation temperature HDT | |||
| 1.8 MPa | 125 | ℃ | ISO 75/Af |
| Relative Temperature Index | |||
| Electrical Elec | 125 | ℃ | UL-746B |
| Mechanical impact Mech w/impact | 115 | ℃ | UL-746B |
| Non mechanical impact Mech w/o impact | 125 | ℃ | UL-746B |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Water Absorption | |||
| 100℃ | 0.58 | % | ISO 62 |
| 23℃ | 0.35 | % | ISO 62 |
| Density | 1.2 | g/cm³ | ISO 1183 |
| Mold Shrinkage | |||
| Flow, 3.2 mm | 0.68 | % | 内部 |
| Moisture Absorption | ISO 62 | ||
| 23℃。50%r.h. | 0.15 | ||
| Melt Volume Rate | |||
| 300℃，1.2 kg | 7 | cm³/10min | ISO 1133 |
| OPTICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Light Transmission | |||
| 2.54 mm | >90 | % | ASTM D1003 |
| Haze | |||
| 2 mm | 1 | % | 内部 |
| 1.586 | ISO 489 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric Strength | |||
| Air, 3.2 mm | 15 | kV/mm | ASTM D149 |
| Relative permittivity | |||
| 50/60 Hz | 3.17 | ASTM D150 | |
| 1 MHz | 2.96 | ASTM D150 | |
| Dissipation Factor | |||
| 50/60 Hz | 0.0009 | ASTM D150 | |
| 1 MHz | 0.01 | ASTM D150 | |
| Hot wire ignition | 3 | PLC Code | UL 746A |
| High Ampere Arc Ign, surface | 1 | PLC Code | UL 746A |
| Compared Tracking Index | 3 | PLC Code | UL 746A |
| Volume Resistance | >1E15 | ohm·cm | IEC 60093 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| UL flame retardant rating UL Recognized | |||
| 0.3 mm | V-2 | UL 94 | |
| 1.5 mm | V-0 | UL 94 | |
| Glow Wire Flammability Index | |||
| 0.8 mm | 750 | ℃ | IEC 60695-2-12 |
| 1.5 mm | 850 | ℃ | IEC 60695-2-12 |
| 1 mm | 960 | ℃ | IEC 60695-2-12 |
| Glow Wire Ignitability Temperature | |||
| 1.0 mm | 850 | ℃ | IEC 60695-2-13 |
| 1.5 mm | 850 | ℃ | IEC 60695-2-13 |
| UV light, water exposure/immersion | F2 | UL 746C |
| Process Conditions | |||
|---|---|---|---|
| Injection molding | Nominal value | Unit | Test method |
| Drying Temperature | 120 | ℃ | |
| Drying Time | 2-4 | hr | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 280-300 | ℃ | |
| Nozzle temperature | 270-290 | ℃ | |
| Front Zone 3 Temperature | 280-300 | ℃ | |
| Middle Zone 2 Temperature | 270-290 | ℃ | |
| Rear Zone 1 Temperature | 260-280 | ℃ | |
| Hopper Temperature | 60-80 | ℃ | |
| Mold Temperature | 80-100 | ℃ | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. Type I, 2.0 in/min |
| 4. 0.051 in/min |
| 5. 0.079 in/min |
| 6. 0.49 in/min |
| 7. at Break |
| 8. 80*10*3 mm |
| 9. 80*10*4 mm |
| 10. Rate A (50°C/h), Loading 2 (50 N) |
| 11. Surface |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |