Lexan®EFR95-701 Film

About
Lexan®EFR95-701薄膜是黑色、单面细亚光、单面天鹅绒环保阻燃聚碳酸酯薄膜。阻燃等级在UL94 的测试方法下厚度为0.38mm测试结果为V-0,0.178mm为VTM0。该薄膜具有可成形性、优异的机械和电学性能、高尺寸稳定性。该薄膜具有可成形性、优异的机械和电气性能、高温下良好的尺寸稳定性和高的易燃性,使其在诸如电源绝缘、盘驱动器绝缘、母线绝缘、电视/监视器绝缘、PC板绝缘,商业设备绝缘等应用领域具有广阔的应用前景,当用金属箔层压时具有绝缘和EMI/RFI屏蔽作用。

Product Description
SupplierSABIC
GenericPolycarbonate
Material StatusCommercial: Active
FeaturesExcellent Processability,Good Dimensional Stability

Technical Data
MECHANICALNominal valueUnitTest method
Flexural strength
0.43 mm90.5ASTM D2176-69
0.508 mm91.1ASTM D2176-69
Puncture strength (dynamic compensation)21.3J/mmASTM D3763
tear strength
start153kN/mASTM D1004
crack propagation14.65kN/mASTM D1922
Tensile strain
fracture114%ISO 527
Tensile modulus
0.43 mm2599MPaISO 527
tensile strength
Maximum, 0.43 mm62.2MPaISO 527
Yield, 0.43 mm58.7MPaISO 527

THERMALNominal valueUnitTest method
Embrittlement temperature<-50ASTM D746
Hot deformation temperature
1.8 MPa131ISO 75
Vicat Softening Temp
B120151ASTM D1525
Tg153ISO 11357
Thermal conductivity coefficient0.18W/m/KASTM D5470
Linear coefficient of thermal expansion6.6E-5/℃ISO 11359
specific heat
25℃1.23KJ/Kg/°CASTM E1269

PHYSICALNominal valueUnitTest method
Water absorption rate
24hr0.34%ISO 62
Density1.23g/cm³ISO 1183
Shrinkage rate
MD:150℃,0.5 hrs1.25%ASTM D1204
TD:150°C,0.5 hrs0.11%ASTM D1204

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant level
0.38-0.55 mmVTM0
0.18-0.25 mmV-0

optical performanceNominal valueUnitTest method
gloss52/3.8ISO 2813

Electrical performanceNominal valueUnitTest method
Dissipation factor
1 MHz0.01IEC 60250
60 Hz0.002IEC 60250
Surface resistivity4.4E+15ohms/sqIEC 60093
Volume resistivity1.17E+16ohms·cmIEC 60093
Dielectric strength
23 ℃, 0.43 mm, in oil47kv/mmIEC 60243
Dielectric constant
1 MHz2.45IEC 60250
60 Hz2.49IEC 60250

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.