| About |
|---|
| Product Description | |
|---|---|
| Supplier | SINOPEC Shanghai |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Good Dimensional Stability,High liquidity,Quick molding cycle |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.924 | g/cm³ | GB/T1033-1985 |
| Melt Flow Rate | 25.7 | g/10min | GB/T3662-2000 |
| Melt expansion ratio | 0.87 | Q/SH3045 004.4-2010 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 10.0 | MPa | GB/T1040-1992 |
| Tensile strain | |||
| fracture | 536 | % | GB/T1040-1992 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 68 | ℃ | GB/T3662-2000 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |
