| About |
|---|
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Good flexibility,Halogen free,Flame Characteristics,V-2 |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 220℃，10.0kg | 55 | g/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.40 to 0.70 | % | ISO 2577 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 14 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 4.0 mm | 75.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| B50 | 86.0 | ℃ | ISO 306 |
| Relative temperature index | |||
| Electrical performance | 60.0 | ℃ | UL 746 |
| Strength mechanical performance | 60.0 | ℃ | UL 746 |
| Impact mechanical performance | 60.0 | ℃ | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 0.80 mm | V-2 | UL 94 | |
| 3.10 mm | V-2 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 4 mm | 45.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| Fracture, 4 mm | 15 | % | ISO 527-2/50 |
| Yield, 4 mm | > 5.0 | % | ISO 527-2/50 |
| Bending modulus | |||
| 4 mm | 2600 | MPa | ISO 178 |
| bending strength | |||
| 4 mm | 72.0 | MPa | ISO 178 |
| Rockwell hardness | |||
| R-level | 105 | ISO 2039-2 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 70 to 80 | °C | “null” |
| Drying time | 3.0 to 4.0 | hr | “null” |
| Temperature at the rear of the barrel | 180 to 200 | °C | “null” |
| Temperature in the middle of the barrel | 190 to 210 | °C | “null” |
| Front temperature of material barrel | 200 to 220 | °C | “null” |
| Nozzle temperature | 200 to 230 | °C | “null” |
| Processing (melt) temperature | 200 to 230 | °C | “null” |
| Mold temperature | 40 to 60 | °C | “null” |
| Back pressure | 29.4 to 58.8 | MPa | “null” |
| Screw speed | 30 to 60 | rpm | “null” |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |