| About |
|---|
| LG ABS HI140是一种丙烯腈丁二烯苯乙烯(ABS)材料,。 该产品在北美洲、拉丁美洲、欧洲或亚太地区有供货,加工方式为:注射成型。 LG ABS HI140的主要特性为:耐冲击。&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | High impact resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 | ASTM D792 | |
| Melt Flow Rate | |||
| 220℃，10.0kg | 13 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.40-0.70 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 3.20 mm | 36.9 | MPa | ASTM D638 |
| Tensile strain | |||
| 3.20 mm | 38 | % | ASTM D638 |
| Bending modulus | |||
| 6.40 mm | 1620 | MPa | ASTM D790 |
| bending strength | |||
| 6.40 mm | 55.8 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 102 | ASTM D785 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，6.4mm | 392 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 101 | ℃ | ASTM D1525 |
| Hot deformation temperature | |||
| 6.4 mm | 87 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.0 mm | HB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Processing speed | Nominal value | Unit | Test method |
| Processing temperature | Nominal value | Unit | Test method |
| Processing pressure | Nominal value | Unit | Test method |
| Screw speed | 50-100 | % | |
| drying temperature | 70-80 | ℃ | |
| Drying time | 2-3 | hrs | |
| Temperature at the rear of the barrel | 190-200 | ℃ | |
| Temperature in the middle of the barrel | 200-220 | ℃ | |
| Front temperature of material barrel | 210-230 | ℃ | |
| Injection pressure | 60-100 | MPa | |
| Maintaining pressure | 70-90 | MPa | |
| Back pressure | 0.5-1 | MPa | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |