| About |
|---|
| “ID” grade of LG PMMA realizes high light transmittance and high diffusion with our unique diffusion agent and maximizes the efficiency of lighting fixtures without exposing the luminous source of LED illumination. High transmittance/low diffusion, high transmittance/high diffusion and low transmittance/high diffusion products may be used depending on the features of lighting.&& |
| Product Description | |
|---|---|
| Generic | PMMA |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| optical performance | Nominal value | Unit | Test method |
| Transmittance | JIS K7105 | ||
| 1000 µm | 92.0 | % | |
| 2000 µm | 91.0 | % | |
| 3000 µm | 90.0 | % | |
| Haze | JIS K7105 | ||
| 1000 µm | 16 | % | |
| 2000 µm | 30 | % | |
| 3000 µm | 37 | % | |
| Notes |
|---|
| 1. Diffusion Agent |
| 2. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |